|
|
Velvet Coin Display Boxes

 |
 |
 |
| VSB1 |
VSB2 |
VSB3 |
 |
 |
 |
| VSB4 |
VSB5 |
VSB6 |
These Airtite coin gift boxes are made of steel, with a hinged cover and
wrapped with a blue velvet velour material. The inside has a white satin liner under the
lid, with a blue velour insert in the base, and comes with a white protective sleeve.
There are six different box sizes which may
hold from a single Airtite capsule to 36
Airtite capsules; or from 1 to 10 certified slabs by ACG, ANACS (lg or sml), ICG, NGC,PCI, PCGS, or SEGS. Configuration options listed are the only ones available at this time.
The A, T, H, and I single Airtite coin display boxes have a molded base to hold
the AirTite (and do not require a reflector)*. All other gift boxes have
a display card with die cut openings; and a silver or gold reflector under the card
that shows through the AirTite capsule to enhance the coin. Use a silver reflector
with silver coins or a gold reflector with gold coins.
Screen printing available on 50+ boxes. Normally printed on the white liner on the inside of the gift box.
See chart at bottom of page for screen printing charges.
NOTE: VSB1 boxes are in stock, all others are special order. Allow 10 ~ 14 days for delivery.
|
Which Box To Order?
- Step 1: Determine the model of your AirTite coin Capsules by the diameter or coin type (check charts below)
- Step 2: How many AirTite coin Capsules of each model do you want to put in your case?
- Step 3: Choose a gift box for your AirTite model from the following links:
- Note: For multiple AirTite models inside one gift box, choose from the following :
|
| A |
1.22" / 30.94mm |
| T |
1.44" / 36.9mm |
| H |
1.75" / 44.45mm |
| I |
2.03" / 51.59mm |
| X |
2.12" / 53.80mm |
| Y |
2.81" / 71.37mm |
| Z |
3.26" / 85.91mm |
|
| |
Direct Fit |
Ring Type |
| Cent |
A |
A |
| Nickel |
A |
T |
| Dime |
A |
A |
| Quarter |
A |
T |
| Half Dollar |
T |
H |
| Small Dollar |
A |
H |
| Silver Dollar |
H |
I |
| Silver Eagle |
H |
I |
|
| Quantity Discount on VSB Cases - Mix and match for savings |
| Order
10 or more, save 5% each - 50 or more, save 10% each |
| VSB1 measures 2 15/16" x 3 1/4" x 1" |
| VSB2 measures 3 3/8" x 6 5/8" x 1" |
| VSB3 measures 5" x 5" x 1" |
| VSB4 measures 4 3/4" x 7 5/8" x 1 1/4" |
| VSB5 measures 7" x 10" x 1 1/4" |
| VSB6 measures 7" x 14" x 1 1/2" |
| Die Charge (single color) |
$75.00 |
| Die Charge (two colors) |
$110.00 |
| Set Up |
$40.00 |
| Imprint Charge (under 250) |
$.35 each |
| Imprint Charge (over 250) |
$.30 each |
Top
|