|
|
Coin Presentation Cases With Leatherette Finish |
|
These coin presentation cases are made of steel with a hinged cover and wrapped with a black, textured leather-like material, inside has a white satin liner in the lid with a black velour insert in the base and come with a white protective sleeve. There are six different box sizes, depending on the configuration selected to hold from a single Airtite capsule up to 36 Airtite capsules. Configuration options listed are the only ones available at this time.
The A, T, H, and I single coin display boxes have a molded base to hold the AirTite (and do not require a reflector)*. All other cases have a display card with die cut openings and a silver or gold reflector under the card that shows through the AirTite to enhance the coin. Normally you would use a silver reflector with silver coins or a gold reflector with gold colored coins.
NOTE: LSB1 cases are in stock, all others are special order only and require 10 ~ 14 days for delivery.
Screen printing available on 50+ cases. Call for details and pricing.
|
WHICH CASE TO ORDER?
- Step 1: Determine model of your AirTite coin holders by diameter or coin type (check charts below)
- Step 2: How many AirTite coin holders of each model do you want to put in your case?
- For all A model AirTite coin holders click here
- For all T model AirTite coin holders click here
- For all H model AirTite coin holders click here
- For all I model AirTite coin holders click here
- For all Bar model AirTite coin holders click here
- For all X, Y or Z model AirTite coin holders click here
- For two different models of AirTite coin holders click here
- For three different models of AirTite coin holders click here
- For four different models of AirTite coin holders click here
|
| AirTite Model | Outside Diameter |
| A |
1.22" / 30.94mm |
| T |
1.44" / 36.9mm |
| H |
1.75" / 44.45mm |
| I |
2.03" / 51.59mm |
| X |
2.12" / 53.80mm |
| Y |
2.81" / 71.37mm |
| Z |
3.26" / 85.91mm |
|
| Coin Type | AirTite Model |
| | Direct Fit | Ring Type |
| Cent |
A |
A |
| Nickel |
A |
T |
| Dime |
A |
A |
| Quarter |
A |
T |
| Half Dollar |
T |
H |
| Small Dollar |
A |
H |
| Silver Dollar |
H |
I |
| Silver Eagle |
H |
I |
|
| |
Quantity Discount on LSB Cases |
|
| |
Order
10 or more and save 5% each. |
|
| |
Order
50 or more and save 10% each. |
|
| |
Call for volume discounts. |
|
| |
Yes,
you can mix and match models.
The discount will appear at checkout. |
|
| LSB Case Measurements |
| LSB1 measures 2 15/16" x 3 1/4" x 1" |
| LSB2 measures 3 3/8" x 6 5/8" x 1" |
| LSB3 measures 5" x 5" x 1" |
| LSB4 measures 4 3/4" x 7 5/8" x 1 1/4" |
| LSB5 measures 7" x 10" x 1 1/4" |
| LSB6 measures 7" x 14" x 1 1/2" |
|